Published: 2024-04-20
Integration of Geographic Information Systems and Spatial Data Analysis in Location Decision Making for Manufacturing Industries
DOI: 10.35870/ijsecs.v4i1.2027
Nofirman, Naufal Haidar Ahmada, Tribowo Rachmat Fauzan
Abstract
-This research analyzes potential locations for the manufacturing industry studied using a GIS approach and data analysis. Researchers combine statistical and spatial analysis methods and unique techniques such as TOPSIS and MOORA to evaluate the most suitable locations based on predefined criteria. Key findings show that Purbalingga Regency is the optimal location, supported by high labor availability, developed logistics infrastructure, and supportive environmental regulations. Sumedang Regency also shows good potential, especially regarding vital market accessibility and strict environmental regulations. However, Bengkulu City faces challenges in several aspects, such as underdeveloped logistics infrastructure and suboptimal ecological regulations. The implications of these findings for manufacturing location decision-making practices, the advantages and disadvantages of GIS approaches and data analysis, and the research contributions to science and the manufacturing industry are also discussed in depth. Thus, this research provides valuable insights for decision-makers in allocating resources and planning investments in the manufacturing industry.
Keywords
Decision-Making ; Manufacturing Location ; Spatial Data ; Geographic Information Systems (GIS) ; Data Analysis
Downloads
Article Information
This article has been peer-reviewed and published in the International Journal Software Engineering and Computer Science (IJSECS). The content is available under the terms of the Creative Commons Attribution 4.0 International License.
-
Issue: Vol. 4 No. 1 (2024)
-
Section: Articles
-
Published: April 20, 2024
-
License: CC BY 4.0
-
Copyright: © 2024 Authors
-
DOI: 10.35870/ijsecs.v4i1.2027
AI Research Hub
This article is indexed and available through various AI-powered research tools and citation platforms. Our AI Research Hub ensures that scholarly work is discoverable, accessible, and easily integrated into the global research ecosystem. By leveraging artificial intelligence for indexing, recommendation, and citation analysis, we enhance the visibility and impact of published research.
Nofirman
Geography Education Study Program, Faculty of Teacher Training and Education, Universitas Prof. Dr. Hazairin, SH, Bengkulu City, Bengkulu City, Indonesia
Naufal Haidar Ahmada
Regional and City Planning Study Program, Institut Teknologi dan Bisnis Muhammadiyah Purbalingga, Purbalingga Regency, Central Java, Indonesia
Tribowo Rachmat Fauzan
Logistics Business Study Program, Faculty of Social and Political Sciences, Universitas Padjadjaran, Sumedang Regency, West Java Province, Indonesia
-
Pinem, A. P. R., Indriyawati, H., & Pramono, B. A. (2020). Sistem pendukung keputusan penentuan lokasi industri berbasis spasial menggunakan metode moora. JATISI (Jurnal Teknik Informatika Dan Sistem Informasi), 7(3), 639-646. https://doi.org/10.35957/jatisi.v7i3.231
-
Pareda, S., Mongi, C., & Montolalu, C. (2019). Sistem pendukung keputusan pemilihan karyawan teladan di pt aneka tambang (antam) tbk unit bisnis pertambangan buli menggunakan metode simple additive weight (saw). d'CARTESIAN, 8(1), 1. https://doi.org/10.35799/dc.8.1.2019.22676
-
Triswati, E., Wati, N., & Kifti, W. M. (2022). Pengalokasian gas lpg 3 kg terbanyak ke pangkalan mitra pt. putra paluta asahan dengan weight product. JATISI (Jurnal Teknik Informatika Dan Sistem Informasi), 9(3), 1771-1783. https://doi.org/10.35957/jatisi.v9i3.2204
-
Ramadhan, P. S., Ramadhan, M., & Dahria, M. (2021). Penerapan metode waspas dan moora dalam pengambilan keputusan. CESS (Journal of Computer Engineering, System and Science), 6(2), 162. https://doi.org/10.24114/cess.v6i2.24805
-
Primadasa, Y. and Amalia, V. (2017). Penerapan metode multi factor evaluation process untuk pemilihan tanaman pangan di kabupaten musi rawas. Sisfo, 07(01). https://doi.org/10.24089/j.sisfo.2017.09.004
-
Fitriana, J., Ripanti, E. F., & Tursina, T. (2018). Sistem pendukung keputusan pemilihan mahasiswa berprestasi dengan metode profile matching. Jurnal Sistem Dan Teknologi Informasi (JUSTIN), 6(4), 153. https://doi.org/10.26418/justin.v6i4.27113
-
Setiawan, A. and Fitria, V. A. (2023). Sistem pendukung keputusan pemilihan lokasi agen garasi kreatif metode fuzzy saw. JIPI (Jurnal Ilmiah Penelitian Dan Pembelajaran Informatika), 8(1), 1-11. https://doi.org/10.29100/jipi.v8i1.3272
-
Christioko, B. V., Indriyawati, H., & Hidayati, N. (2017). Fuzzy multi-atribute decision making (fuzzy madm) dengan metode saw untuk pemilihan mahasiswa berprestasi. Jurnal Transformatika, 14(2), 82. https://doi.org/10.26623/transformatika.v14i2.441
-
Fajrah, N. and Zetli, S. (2020). Analisis pengambilan keputusan penentuan lokasi sentra oleh-oleh khas batam. Jurnal Rekayasa Sistem Industri, 6(1), 51-58. https://doi.org/10.33884/jrsi.v6i1.2667
-
Johari, N. S., Abdullah, N., & Bukari, S. M. (2022). Gis communicate emergency preparedness mapping: the usability for rural area. IOP Conference Series: Earth and Environmental Science, 1022(1), 012031. https://doi.org/10.1088/1755-1315/1022/1/012031
-
Greene, R., Devillers, R., Luther, J. E., & Eddy, B. G. (2011). Gis-based multiple-criteria decision analysis. Geography Compass, 5(6), 412-432. https://doi.org/10.1111/j.1749-8198.2011.00431.x
-
Rahayu, M. J., Rahayu, P. -., Putri, R. A., & Rini, E. F. (2022). Peran pemanfaatan sig dalam pengendalian pemanfaatan ruang perkotaan: studi kasus kelurahan penumping dan sriwedari, surakarta. Region : Jurnal Pembangunan Wilayah Dan Perencanaan Partisipatif, 17(2), 226. https://doi.org/10.20961/region.v17i2.44598
-
Muzaky, M. H., Cahyono, A. B., & Nurwatik, N. (2022). Penentuan lokasi flood shelter menggunakan analisis spatial multi criteria evaluation (smce) (studi kasus : kota batu, provinsi jawa timur). Jurnal Teknik ITS, 11(3). https://doi.org/10.12962/j23373539.v11i3.98442
-
Menajang, H. (2019). Pengaruh investasi dan tenaga kerja terhadap pertumbuhan ekonomi kota manado. Jurnal Pembangunan Ekonomi Dan Keuangan Daerah, 16(4). https://doi.org/10.35794/jpekd.23425.16.4.2014
-
Rosyanti, L. and Hadi, I. (2020). Dampak psikologis dalam memberikan perawatan dan layanan kesehatan pasien covid-19 pada tenaga profesional kesehatan. Health Information : Jurnal Penelitian, 12(1), 107-130. https://doi.org/10.36990/hijp.vi.191
-
Ellram, L. M., Tate, W. L., & Petersen, K. J. (2013). Offshoring and reshoring: an update on the manufacturing location decision. Journal of Supply Chain Management, 49(2), 14-22. https://doi.org/10.1111/jscm.12019
-
MacCarthy, B. L. and Atthirawong, W. (2003). Factors affecting location decisions in international operations – a delphi study. International Journal of Operations &Amp; Production Management, 23(7), 794-818. https://doi.org/10.1108/01443570310481568
-
Zieziula, J. and Niewiadomska, M. (2021). Location factors of e-commerce distribution centers in zachodniopomorskie vivodeship based on the example of a selected company. Entrepreneurship and Sustainability Issues, 9(1), 37-51. https://doi.org/10.9770/jesi.2021.9.1(3).
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Copyright and Licensing Agreement
Authors who publish with this journal agree to the following terms:
1. Copyright Retention and Open Access License
- Authors retain full copyright of their work
- Authors grant the journal right of first publication under the Creative Commons Attribution 4.0 International License (CC BY 4.0)
- This license allows unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited
2. Rights Granted Under CC BY 4.0
Under this license, readers are free to:
- Share — copy and redistribute the material in any medium or format
- Adapt — remix, transform, and build upon the material for any purpose, including commercial use
- No additional restrictions — the licensor cannot revoke these freedoms as long as license terms are followed
3. Attribution Requirements
All uses must include:
- Proper citation of the original work
- Link to the Creative Commons license
- Indication if changes were made to the original work
- No suggestion that the licensor endorses the user or their use
4. Additional Distribution Rights
Authors may:
- Deposit the published version in institutional repositories
- Share through academic social networks
- Include in books, monographs, or other publications
- Post on personal or institutional websites
Requirement: All additional distributions must maintain the CC BY 4.0 license and proper attribution.
5. Self-Archiving and Pre-Print Sharing
Authors are encouraged to:
- Share pre-prints and post-prints online
- Deposit in subject-specific repositories (e.g., arXiv, bioRxiv)
- Engage in scholarly communication throughout the publication process
6. Open Access Commitment
This journal provides immediate open access to all content, supporting the global exchange of knowledge without financial, legal, or technical barriers.