Published: 2024-12-01
Design of a Watering Control System for Chili Seedlings Using Arduino Uno
DOI: 10.35870/ijsecs.v4i3.3225
Syarifah Fitrah Ramadhani, Mohamad Efendi Lasulika, Andi Bode, Moh. Adrian Djailani, Risky Randa Posumah
Abstract
Technology in agriculture has brought revolutionary changes in the way we view and treat food production. This research is the design of a watering control system because controlling plant watering is an important factor in healthy plant growth. With the use of technology such as Arduino Uno, designing an automatic watering control system that can monitor soil moisture, regulate watering according to plant needs, besides that, another goal is to increase agricultural productivity by optimizing watering of chili plants. The results of research and testing that have been carried out, the Arduino Uno based automatic plant irrigation tool shows success in its design and operation; this tool has been designed and made using an Arduino Uno microcontroller and YL-69 sensor, as well as other supporting devices, which function according to their purpose and function with good performance in automatic watering. This tool can work effectively when the humidity sensor sends data to the Arduino, where if the received data is below the specified limit, the relay automatically activates the water pump to perform watering. During the process, if the sensor detects soil moisture levels above the limit, the relay will turn off the pump and stop watering
Keywords
Arduino Uno ; Automatic Watering ; Chili Seedlings ; Control System ; Intelligent System
Downloads
Article Information
This article has been peer-reviewed and published in the International Journal Software Engineering and Computer Science (IJSECS). The content is available under the terms of the Creative Commons Attribution 4.0 International License.
-
Issue: Vol. 4 No. 3 (2024)
-
Section: Articles
-
Published: December 1, 2024
-
License: CC BY 4.0
-
Copyright: © 2024 Authors
-
DOI: 10.35870/ijsecs.v4i3.3225
AI Research Hub
This article is indexed and available through various AI-powered research tools and citation platforms. Our AI Research Hub ensures that scholarly work is discoverable, accessible, and easily integrated into the global research ecosystem. By leveraging artificial intelligence for indexing, recommendation, and citation analysis, we enhance the visibility and impact of published research.
Syarifah Fitrah Ramadhani
Information Systems Program, Universitas Ichsan Gorontalo, Gorontalo City, Gorontalo Province, Indonesia
Mohamad Efendi Lasulika
Information Systems Program, Universitas Ichsan Gorontalo, Gorontalo City, Gorontalo Province, Indonesia
Andi Bode
Information Systems Program, Universitas Ichsan Gorontalo, Gorontalo City, Gorontalo Province, Indonesia
Moh. Adrian Djailani
Information Systems Program, Universitas Ichsan Gorontalo, Gorontalo City, Gorontalo Province, Indonesia
Risky Randa Posumah
Information Systems Program, Universitas Ichsan Gorontalo, Gorontalo City, Gorontalo Province, Indonesia
-
Alfonsius, E., Kalengkongan, W., Caesar, S., & Ngangi, W. (2024). Sistem Monitoring Dan Kontroling Prototype Penyiram Tanaman Otomatis Berbasis Iot (Internet Of Things). Teknoinfo: Jurnal Bidang Teknik Informatika dan Sistem Informasi, 18(1), 44–55. Retrieved from https://ejurnal.teknokrat.ac.id/index.php/teknoinfo/index
-
Wibowo, A. (2023). Revolusi Industri 4.0 Dan Society 5.0. Penerbit Yayasan Prima Agus Teknik. Retrieved from https://penerbit.stekom.ac.id/index.php/yayasanpat/article/view/457
-
Denada, T., Nirmala, T. A., & Wulandari, A. (2021). Dinamika Nasionalisme Di Masa Pandemi Covid 19 Dan Di Era Revolusi 4.0. Jurnal Bina Ilmu Cendekia, 2(2), 182–197.
-
Thahir, M. I., Semmaila, B., & Arfah, A. (2021). Pengaruh Pertumbuhan Ekonomi, Pendidikan Dan Kesehatan Terhadap Kemiskinan Di Kabupaten Takalar. Journal of Management Science (JMS), 2(1), 61–81.
-
Wibowo, A. (2023). “Internet Of Things (Iot) Dalam Ekonomi Dan Bisnis Digital.” Penerbit Yayasan Prima Agus Teknik.
-
Ekonomi, F., & Kuala, U. (2024). Peran Inovasi Teknologi Dalam Meningkatkan Efisiensi Ekonomi Pertanian. Jurnal Ekonomi dan Bisnis, 2(1), 90–97.
-
Sofyan, W. (2023). Pemanfaatan Teknologi Informasi Di Berbagai Sektor Pada Masa Society 5.0. PT. Sonpedia Publishing Indonesia.
-
Sabardila, A., Budiargo, A. D., Wiratmoko, G., Himawan, J. A., Triutami, A., Intansari, A., ... & et al. (2020). Pembentukan Karakter Peduli Lingkungan Melalui Kegiatan Penghijauan Pada Siswa Mim Derasan Sempu, Boyolali. Buletin KKN Pendidikan, 1(2), 35–41.
-
Orlando, E., & Chandra, Y. I. (2022). Penerapan Metode Prototype Dalam Membuat Alat Penyiraman Tanaman Otomatis Berbasis Mikrokontroler Arduino Uno. Tekinfo: Jurnal Bidang Teknik Industri dan Teknik Informatika, 23(2), 9–23.
-
Effendi, N., Ramadhani, W., & Farida, F. (2022). Perancangan Sistem Penyiraman Tanaman Otomatis Menggunakan Sensor Kelembapan Tanah Berbasis Iot. Journal of Computer Science and Information Technology (Coscitech), 3(2), 91–98.
-
Suparyanto, & Rosad. (2020). Implementasi Sistem Informasi. Jurnal Ilmiah Teknologi Informasi Asia, 5(3), 248–253.
-
Mustaqim, R. (2021). Rancang Bangun Alat Kendali Smart Sawah Berbasis Wemos D1 R1 (Unpublished doctoral dissertation). Politeknik Harapan Bersama Tegal.
-
Novianto, A. D., Farida, I. N., & Sahertian, J. (2021). Alat Penyiram Tanaman Otomatis Berbasis Iot Menggunakan Metode Fuzzy Logic. Prosiding Seminar Nasional Inovasi Teknologi, 316–321.
-
Rahmadiyanti, M. (2021). Strategi Pemulihan Sektor Pertanian Dan Pengembangan Sumber Pangan Dalam Meningkatkan Perekonomian Di Masa Pandemi. Jurnal Agroforestri Indonesia, (March).
-
Osanaiye, O., Mannan, T., & Aina, F. (2021). An iot-based soil moisture monitor. African Journal of Science Technology Innovation and Development, 14(7), 1908-1915. https://doi.org/10.1080/20421338.2021.1988413
-
Kamaruddin, F., Malik, N., Murad, N., Latiff, N., Yusof, S., & Hamzah, S. (2019). Iot-based intelligent irrigation management and monitoring system using arduino. Telkomnika (Telecommunication Computing Electronics and Control), 17(5), 2378. https://doi.org/10.12928/telkomnika.v17i5.12818
-
Junaid, K., Sukhi, Y., & Anita, S. (2023). Low-cost smart irrigation for agricultural land using iot. IETE Journal of Research, 70(3), 2659-2672. https://doi.org/10.1080/03772063.2023.2178535
-
Ihuoma, S., Madramootoo, C., & Kalácska, M. (2021). Integration of satellite imagery and in situ soil moisture data for estimating irrigation water requirements. International Journal of Applied Earth Observation and Geoinformation, 102, 102396. https://doi.org/10.1016/j.jag.2021.102396.
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Copyright and Licensing Agreement
Authors who publish with this journal agree to the following terms:
1. Copyright Retention and Open Access License
- Authors retain full copyright of their work
- Authors grant the journal right of first publication under the Creative Commons Attribution 4.0 International License (CC BY 4.0)
- This license allows unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited
2. Rights Granted Under CC BY 4.0
Under this license, readers are free to:
- Share — copy and redistribute the material in any medium or format
- Adapt — remix, transform, and build upon the material for any purpose, including commercial use
- No additional restrictions — the licensor cannot revoke these freedoms as long as license terms are followed
3. Attribution Requirements
All uses must include:
- Proper citation of the original work
- Link to the Creative Commons license
- Indication if changes were made to the original work
- No suggestion that the licensor endorses the user or their use
4. Additional Distribution Rights
Authors may:
- Deposit the published version in institutional repositories
- Share through academic social networks
- Include in books, monographs, or other publications
- Post on personal or institutional websites
Requirement: All additional distributions must maintain the CC BY 4.0 license and proper attribution.
5. Self-Archiving and Pre-Print Sharing
Authors are encouraged to:
- Share pre-prints and post-prints online
- Deposit in subject-specific repositories (e.g., arXiv, bioRxiv)
- Engage in scholarly communication throughout the publication process
6. Open Access Commitment
This journal provides immediate open access to all content, supporting the global exchange of knowledge without financial, legal, or technical barriers.