Published: 2023-01-01
Sistem Kipas Angin Otomatis Dengan Sensor Suhu dan Sensor Ultrasonik Berbasis Arduino
DOI: 10.35870/jtik.v7i1.700
Downloads
Abstract
There are several factors that affect the room temperature, including the weather and the number of people who exceed the capacity. Hot temperature room can interfere our concentration. To overcome this, a tool is needed to decrease the room temperature such as a fan. However, people often forget to turn off the fan, as a result there will be the fan components quickly damage. Based on this case, this research aims to how to make an automatic fan system. By utilizing the DHT11 temperature sensor and ultrasonic sensor HC-SR04 and controlled by Arduino Uno. The result of test is that the fan will automatically turn on when the temperature reaches 300c or the number of people in the room reaches 10 people and the fan will turn off if it does not meet these conditions. With a system like this, it will extend the life of the fan and make it practical to turn on or turn off the fan.
Keywords
Arduino ; Fan ; Sensor DHT11 ; Sensor HC-SR04
Article Information
This article has been peer-reviewed and published in the Jurnal JTIK (Jurnal Teknologi Informasi dan Komunikasi). The content is available under the terms of the Creative Commons Attribution 4.0 International License.
-
Issue: Vol. 7 No. 1 (2023)
-
Section: Computer & Communication Science
-
Published: %750 %e, %2023
-
License: CC BY 4.0
-
Copyright: © 2023 Authors
-
DOI: 10.35870/jtik.v7i1.700
AI Research Hub
This article is indexed and available through various AI-powered research tools and citation platforms. Our AI Research Hub ensures that scholarly work is discoverable, accessible, and easily integrated into the global research ecosystem. By leveraging artificial intelligence for indexing, recommendation, and citation analysis, we enhance the visibility and impact of published research.
Abyarake Adiyoga
Program Studi Teknik Informatika, Fakultas Teknologi Informasi, Universitas Kristen Satya Wacana
Dian Widiyanto Chandra
Program Studi Teknik Informatika, Fakultas Teknologi Informasi, Universitas Kristen Satya Wacana
-
Purnamasari, I. and Rezasatria, M., 2019. Rancang Bangun Pengendali Kipas Angin Berbasis Mikrokontroller Atmega 16 Melalui Aplikasi Android Dengan Bluetooth. Simetris: Jurnal Teknik Mesin, Elektro Dan Ilmu Komputer, 10(1), pp.147-160. DOI: 10.24176/simet.v10i1.2883.
-
Alisman, A. and Wildian, W., 2018. Rancang Bangun Sistem Kontrol Gorden, Lampu, dan Kipas Angin Berbasis Arduino Uno R3. Jurnal Fisika Unand, 7(3), pp.279-285. DOI: 10.25077/jfu.7.3.279-285.2018.
-
Nainggolan, H. and Yusfi, M., 2013. Rancang Bangun Sistem Kendali Temperatur dan Kelembaban Relatif pada Ruangan dengan Menggunakan Motor DC Berbasis Mikrokontroler ATmega8535. Jurnal Fisika Unand, 2(3). DOI: https://doi.org/10.25077/jfu.2.3.%25p.2013.
-
Sumardi, S., 2017. Model Control Lampu Kamar Mandi Menggunakan Sensor Passive Infrared Receiver Berbasis Arduino Uno. METIK Jurnal, 1(2), pp.30-33.
-
Pratama, M.A., Sidhiq, A.F., Rahmanto, Y. and Surahman, A., 2021. Perancangan Sistem Kendali Alat Elektronik Rumah Tangga. Jurnal Teknik Dan Sistem Komputer, 2(1), pp.80-92. DOI: https://doi.org/10.33365/jtikom.v2i1.46.
-
Sanjaya, H., Triyanto, J., Andri, R., Yani, F., Sanjaya, P.P. and Daulay, N.K., 2021, October. Kipas Angin Otomatis Menggunakan Sensor Suhu DHT11. In Seminar Nasional Sains dan Teknologi Informasi (SENSASI) (Vol. 3, No. 1, pp. 187-191).
-
Lukman, M.P. and Rieuwpassa, Y.F.Y., 2018. Sistem lampu otomatis dengan sensor gerak, sensor suhu dan sensor suara berbasis mikrokontroler. Jurnal RESISTOR (Rekayasa Sistem Komputer), 1(2), pp.100-108. DOI: 10.31598/jurnalresistor.v1i2.305.
-
Susanto, A. and Pratiwi, R.W., 2021. Alat Kendali Perangkat Ruangan Otomatis Dengan Sistem Penghitung Menggunakan Sensor Infrared Berbasis Arduino. Jurnal Teknologi dan Sistem Tertanam, 2(2), pp.1-12. DOI: https://doi.org/10.33365/jtst.v2i2.1314.
-
Hidayanto, A. and Winarno, H., 2016. Prototipe Sistem AutoBrake pada Mobil Menggunakan Sensor Jarak Ultrasonik HC-SR04 Berbasis Arduino Mega 2560. Gema Teknologi, 18(4), pp.29-38. DOI: 10.14710/gt.v18i4.21913.
-
Purwanto, H., Riyadi, M., Astuti, D.W.W. and Kusuma, I.W.A.W., 2019. Komparasi Sensor Ultrasonik Hc-Sr04 Dan Jsn-Sr04t Untuk Aplikasi Sistem Deteksi Ketinggian Air. Simetris: Jurnal Teknik Mesin, Elektro dan Ilmu Komputer, 10(2), pp.717-724. DOI: https://doi.org/10.24176/simet.v10i2.3529.
-
Ardiansyah, E., 2018. Sistem Penghitung Jumlah Orang Otomatis Pada Pintu Masuk Berbasis Sensor Ultrasonik dan Mikrokontroler Arduino Uno dengan Metode Bayes (Doctoral dissertation, Universitas Brawijaya).
-
Abdillah, M.I., Darlis, D. and Priramadhi, R.A., 2019. perancangan dan implementasi perangkat pengukur jarak dengan sistem VLC pada sepeda motor untuk komunikasi antar kendaraan. eProceedings of Applied Science, 5(1).
-
Wirawan, I.M.A., Santyadiputra, G.S. and Sugihartini, N., 2017, October. Sistem Pemantau Suhu Lab Jarak Jauh Berbasis Arduino. In Seminar Nasional Vokasi dan Teknologi (SEMNASVOKTEK).
-
Utama, Y.A.K., 2016. Perbandingan Kualitas Antar Sensor Suhu dengan Menggunakan Arduino Pro Mini. e-NARODROID: Jurnal Berkala Program Studi Sistem Komputer, 2(2), pp.145-150.
-
Parhan, J. and Rasyid, R., 2018. Rancang Bangun Sistem Kontrol Kipas Angin dan Lampu Otomatis di Dalam Ruang Berbasis Arduino Uno R3 Menggunakan Multisensor. Jurnal Fisika Unand, 7(2), pp.159-165. DOI: 10.25077/jfu.7.2.159-165.2018.
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Authors who publish with this journal agree to the following terms:
1. Copyright Retention and Open Access License
Authors retain copyright of their work and grant the journal non-exclusive right of first publication under the Creative Commons Attribution 4.0 International License (CC BY 4.0).
This license allows unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
2. Rights Granted Under CC BY 4.0
Under this license, readers are free to:
- Share — copy and redistribute the material in any medium or format
- Adapt — remix, transform, and build upon the material for any purpose, including commercial use
- No additional restrictions — the licensor cannot revoke these freedoms as long as license terms are followed
3. Attribution Requirements
All uses must include:
- Proper citation of the original work
- Link to the Creative Commons license
- Indication if changes were made to the original work
- No suggestion that the licensor endorses the user or their use
4. Additional Distribution Rights
Authors may:
- Deposit the published version in institutional repositories
- Share through academic social networks
- Include in books, monographs, or other publications
- Post on personal or institutional websites
Requirement: All additional distributions must maintain the CC BY 4.0 license and proper attribution.
5. Self-Archiving and Pre-Print Sharing
Authors are encouraged to:
- Share pre-prints and post-prints online
- Deposit in subject-specific repositories (e.g., arXiv, bioRxiv)
- Engage in scholarly communication throughout the publication process
6. Open Access Commitment
This journal provides immediate open access to all content, supporting the global exchange of knowledge without financial, legal, or technical barriers.