Published: 2025-12-01
IoT-Based Prototype System for Automated Measurement of Human Height, Body Weight, and Temperature Using Sensors
DOI: 10.35870/ijsecs.v5i3.5202
Downloads
Abstract
This study presents the development of an IoT-based prototype for automatic measurement of body height, weight, and temperature using Arduino Uno microcontroller. The research responds to operational challenges observed at Puskesmas Cengkareng Timur, where conventional manual measurement tools contribute to process inefficiencies and frequent data recording errors during patient examinations. The prototype integrates three sensor components: HC-SR04 ultrasonic sensor for height measurement, Load Cell with HX711 amplifier module for weight detection, and MLX90614 infrared sensor for contactless temperature monitoring. Sensor outputs are processed through Arduino Uno and displayed via I2C LCD interface. Performance evaluation through laboratory calibration and field trials indicates measurement accuracy within 0.15% error margin across all parameters. Implementation of this device at the health center demonstrates potential for improving service delivery efficiency and reducing patient queue duration during preliminary health screening
Keywords
Internet of Things ; Arduino Uno ; Biometric Measurement ; Healthcare Automation ; Ultrasonic Sensor ; Infrared Sensor
Article Information
This article has been peer-reviewed and published in the International Journal Software Engineering and Computer Science (IJSECS). The content is available under the terms of the Creative Commons Attribution 4.0 International License.
-
Issue: Vol. 5 No. 3 (2025)
-
Section: Articles
-
Published: %750 %e, %2025
-
License: CC BY 4.0
-
Copyright: © 2025 Authors
-
DOI: 10.35870/ijsecs.v5i3.5202
AI Research Hub
This article is indexed and available through various AI-powered research tools and citation platforms. Our AI Research Hub ensures that scholarly work is discoverable, accessible, and easily integrated into the global research ecosystem. By leveraging artificial intelligence for indexing, recommendation, and citation analysis, we enhance the visibility and impact of published research.
Christian P. Colombini
Information Systems Study Program, Faculty of Computer Technology, Sekolah Tinggi Ilmu Komputer Cipta Karya Informatika, East Jakarta City, Special Capital Region of Jakarta, Indonesia
Frencis M. Sarimole
Information Systems Study Program, Faculty of Computer Technology, Sekolah Tinggi Ilmu Komputer Cipta Karya Informatika, East Jakarta City, Special Capital Region of Jakarta, Indonesia
-
Ginting, Y. N., Abdillah, J., & Sarimole, F. M. (2023). Rancang bangun alat sortir jeruk medan berdasarkan luas lingkar berbasis mikrokontroler ATMega2560. Sistem Komputer dan Teknologi Intelegensi Artifisial (SIKOMTIA), 1(3), 192–198. https://doi.org/10.59039/sikomtia.v1i3.18
-
Charaan, R. M. D., Shobana, J., Krishnamoorthy, P., Princy, B. A., Abinaya, R. J., & Murugesan, K. (2023). Enhancement of IoT based flood detection and prevention using Arduino UNO with WiFi module. 2023 9th International Conference on Advanced Computing and Communication Systems (ICACCS), 2290–2294. https://doi.org/10.1109/ICACCS57279.2023.10112673
-
Romadan, D. P., Arinal, V., Sarimole, F. M., & Tundo, T. (2024). Prototipe sistem monitoring kelembapan tanah pada tanaman cabai berbasis Internet of Things dengan metode fuzzy logic menggunakan NodeMCU Esp8266, Blynk dan Thingspeak. MALCOM: Indonesian Journal of Machine Learning and Computer Science, 5(1), 130–140. https://doi.org/10.57152/malcom.v5i1.1600
-
Nalla, S., Rakshitha, K., Kumar, K. S., & Samad, M. (2025). Detection of moving objects with ultrasonic radar. 2025 3rd International Conference on Intelligent Systems, Advanced Computing and Communication (ISACC), 1251–1255. https://doi.org/10.1109/ISACC65211.2025.10969357
-
Ludya, M., Herlambang, Y., & Yunidar, D. (2023). Produk alat ukur tinggi dan berat badan pendeteksi stunting dengan fitur hiburan untuk anak usia 2-5 tahun. Productum: Jurnal Desain Produk (Pengetahuan dan Perancangan Produk), 6(1), 51–62. https://doi.org/10.24821/productum.v6i1.7685
-
Kadir, A. (2018). Arduino & sensor. Penerbit Andi.
-
Wicaksono, M. F. (2019). Aplikasi Arduino dan sensor. Informatika Bandung.
-
Sumampouw, G., Saputra, R. D., Sandy, M., Hidayat, A. M., & Utomo, R. M. (2022). Prototype sistem pengaturan kecepatan kipas DC otomatis menggunakan sensor PIR, sensor ultrasonik, sensor DHT11 berbasis mikrokontroler Arduino Uno dan Node MCU.
-
Rizal, M., Sondakh, D. E., & Ashari, I. F. (2023). Konsep dan implementasi Internet of Things. Yayasan Kita Menulis.
-
Nurlette, D., & Wijaya, T. K. (2018). Perancangan alat pengukur tinggi dan berat badan ideal berbasis Arduino. Sigma Teknika, 1(2), 172–184.
-
Inayah, I. (2021). Analisis akurasi sistem sensor IR MLX90614 dan sensor ultrasonik berbasis Arduino terhadap termometer standar. Jurnal Fisika Unand, 10(4), 428–434. https://doi.org/10.25077/jfu.10.4.428-434.2021
-
Kadir, A. (2017a). Pemrograman Arduino dan Processing. PT Elex Media Komputindo.
-
Asri, S., et al. (2024). Arduino-based automatic weighing machine design. IOP Conference Series: Earth and Environmental Science. https://doi.org/10.1088/1755-1315/1381/1/012028
-
Kadir, A. (2017b). Pemograman Arduino & Android menggunakan App Inventor. PT Elex Media Komputindo.
-
Sathish Kumar, N., Vuayalakshmi, B., Prarthana, R. J., & Shankar, A. (2016). IOT based smart garbage alert system using Arduino UNO. IEEE Region 10 Annual International Conference, Proceedings/TENCON, 1028–1034. https://doi.org/10.1109/TENCON.2016.7848162
-
Gupta, D., Parikh, A., & Swarnalatha, R. (2020). Integrated healthcare monitoring device for obese adults using internet of things (IoT). International Journal of Electrical and Computer Engineering, 10(2), 1239–1247. https://doi.org/10.11591/ijece.v10i1.pp1239-1247
-
Blum, J. (2020). Exploring Arduino tools and techniques for engineering wizardry. John Wiley & Sons, Inc.
-
Putro, C., Anindyasari, F., Aprilia, S., & Prasojo, I. (2024). Rancang bangun automatic contactless thermometer berbasis Arduino Uno. Jurnal Mahasiswa Ilmu Kesehatan, 2(2), 97–107. https://doi.org/10.59841/jumkes.v2i2.2669
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
1. Copyright Retention and Open Access License
Authors retain copyright of their work and grant the journal non-exclusive right of first publication under the Creative Commons Attribution 4.0 International License (CC BY 4.0).
This license allows unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
2. Rights Granted Under CC BY 4.0
Under this license, readers are free to:
- Share — copy and redistribute the material in any medium or format
- Adapt — remix, transform, and build upon the material for any purpose, including commercial use
- No additional restrictions — the licensor cannot revoke these freedoms as long as license terms are followed
3. Attribution Requirements
All uses must include:
- Proper citation of the original work
- Link to the Creative Commons license
- Indication if changes were made to the original work
- No suggestion that the licensor endorses the user or their use
4. Additional Distribution Rights
Authors may:
- Deposit the published version in institutional repositories
- Share through academic social networks
- Include in books, monographs, or other publications
- Post on personal or institutional websites
Requirement: All additional distributions must maintain the CC BY 4.0 license and proper attribution.
5. Self-Archiving and Pre-Print Sharing
Authors are encouraged to:
- Share pre-prints and post-prints online
- Deposit in subject-specific repositories (e.g., arXiv, bioRxiv)
- Engage in scholarly communication throughout the publication process
6. Open Access Commitment
This journal provides immediate open access to all content, supporting the global exchange of knowledge without financial, legal, or technical barriers.