Sistem Kipas Angin Otomatis Dengan Sensor Suhu dan Sensor Ultrasonik Berbasis Arduino
Main Article Content
Abstract
There are several factors that affect the room temperature, including the weather and the number of people who exceed the capacity. Hot temperature room can interfere our concentration. To overcome this, a tool is needed to decrease the room temperature such as a fan. However, people often forget to turn off the fan, as a result there will be the fan components quickly damage. Based on this case, this research aims to how to make an automatic fan system. By utilizing the DHT11 temperature sensor and ultrasonic sensor HC-SR04 and controlled by Arduino Uno. The result of test is that the fan will automatically turn on when the temperature reaches 300c or the number of people in the room reaches 10 people and the fan will turn off if it does not meet these conditions. With a system like this, it will extend the life of the fan and make it practical to turn on or turn off the fan.
Downloads
Article Details
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
The Authors submitting a manuscript do so on the understanding that if accepted for publication, copyright of the article shall be assigned to JTIK journal and Research Division, KITA Institute as the publisher of the journal. Copyright encompasses rights to reproduce and deliver the article in all form and media, including reprints, photographs, microfilms, and any other similar reproductions, as well as translations.
JTIK journal and Research Division, KITA Institute and the Editors make every effort to ensure that no wrong or misleading data, opinions or statements be published in the journal. In any way, the contents of the articles and advertisements published in JTIK journal are the sole and exclusive responsibility of their respective authors and advertisers.
The Copyright Transfer Form can be downloaded here: [Copyright Transfer Form JTIK]. The copyright form should be signed originally and send to the Editorial Office in the form of original mail, scanned document or fax :
Muhammad Wali (Editor-in-Chief)
Editorial Office of Jurnal JTIK (Jurnal Teknologi Informasi dan Komunikasi)
Research Division, KITA Institute
Teuku Nyak Arief Street Nomor : 7b, Lamnyong, Lamgugop, Kota Banda Aceh
Telp./Fax: 0651-8070141
Email: jtik@lembagakita.org - journal@lembagakita.org
References
Purnamasari, I. and Rezasatria, M., 2019. Rancang Bangun Pengendali Kipas Angin Berbasis Mikrokontroller Atmega 16 Melalui Aplikasi Android Dengan Bluetooth. Simetris: Jurnal Teknik Mesin, Elektro Dan Ilmu Komputer, 10(1), pp.147-160. DOI: 10.24176/simet.v10i1.2883.
Alisman, A. and Wildian, W., 2018. Rancang Bangun Sistem Kontrol Gorden, Lampu, dan Kipas Angin Berbasis Arduino Uno R3. Jurnal Fisika Unand, 7(3), pp.279-285. DOI: 10.25077/jfu.7.3.279-285.2018.
Nainggolan, H. and Yusfi, M., 2013. Rancang Bangun Sistem Kendali Temperatur dan Kelembaban Relatif pada Ruangan dengan Menggunakan Motor DC Berbasis Mikrokontroler ATmega8535. Jurnal Fisika Unand, 2(3). DOI: https://doi.org/10.25077/jfu.2.3.%25p.2013.
Sumardi, S., 2017. Model Control Lampu Kamar Mandi Menggunakan Sensor Passive Infrared Receiver Berbasis Arduino Uno. METIK Jurnal, 1(2), pp.30-33.
Pratama, M.A., Sidhiq, A.F., Rahmanto, Y. and Surahman, A., 2021. Perancangan Sistem Kendali Alat Elektronik Rumah Tangga. Jurnal Teknik Dan Sistem Komputer, 2(1), pp.80-92. DOI: https://doi.org/10.33365/jtikom.v2i1.46.
Sanjaya, H., Triyanto, J., Andri, R., Yani, F., Sanjaya, P.P. and Daulay, N.K., 2021, October. Kipas Angin Otomatis Menggunakan Sensor Suhu DHT11. In Seminar Nasional Sains dan Teknologi Informasi (SENSASI) (Vol. 3, No. 1, pp. 187-191).
Lukman, M.P. and Rieuwpassa, Y.F.Y., 2018. Sistem lampu otomatis dengan sensor gerak, sensor suhu dan sensor suara berbasis mikrokontroler. Jurnal RESISTOR (Rekayasa Sistem Komputer), 1(2), pp.100-108. DOI: 10.31598/jurnalresistor.v1i2.305.
Susanto, A. and Pratiwi, R.W., 2021. Alat Kendali Perangkat Ruangan Otomatis Dengan Sistem Penghitung Menggunakan Sensor Infrared Berbasis Arduino. Jurnal Teknologi dan Sistem Tertanam, 2(2), pp.1-12. DOI: https://doi.org/10.33365/jtst.v2i2.1314.
Hidayanto, A. and Winarno, H., 2016. Prototipe Sistem AutoBrake pada Mobil Menggunakan Sensor Jarak Ultrasonik HC-SR04 Berbasis Arduino Mega 2560. Gema Teknologi, 18(4), pp.29-38. DOI: 10.14710/gt.v18i4.21913.
Purwanto, H., Riyadi, M., Astuti, D.W.W. and Kusuma, I.W.A.W., 2019. Komparasi Sensor Ultrasonik Hc-Sr04 Dan Jsn-Sr04t Untuk Aplikasi Sistem Deteksi Ketinggian Air. Simetris: Jurnal Teknik Mesin, Elektro dan Ilmu Komputer, 10(2), pp.717-724. DOI: https://doi.org/10.24176/simet.v10i2.3529.
Ardiansyah, E., 2018. Sistem Penghitung Jumlah Orang Otomatis Pada Pintu Masuk Berbasis Sensor Ultrasonik dan Mikrokontroler Arduino Uno dengan Metode Bayes (Doctoral dissertation, Universitas Brawijaya).
Abdillah, M.I., Darlis, D. and Priramadhi, R.A., 2019. perancangan dan implementasi perangkat pengukur jarak dengan sistem VLC pada sepeda motor untuk komunikasi antar kendaraan. eProceedings of Applied Science, 5(1).
Wirawan, I.M.A., Santyadiputra, G.S. and Sugihartini, N., 2017, October. Sistem Pemantau Suhu Lab Jarak Jauh Berbasis Arduino. In Seminar Nasional Vokasi dan Teknologi (SEMNASVOKTEK).
Utama, Y.A.K., 2016. Perbandingan Kualitas Antar Sensor Suhu dengan Menggunakan Arduino Pro Mini. e-NARODROID: Jurnal Berkala Program Studi Sistem Komputer, 2(2), pp.145-150.
Parhan, J. and Rasyid, R., 2018. Rancang Bangun Sistem Kontrol Kipas Angin dan Lampu Otomatis di Dalam Ruang Berbasis Arduino Uno R3 Menggunakan Multisensor. Jurnal Fisika Unand, 7(2), pp.159-165. DOI: 10.25077/jfu.7.2.159-165.2018.