Rancang Bangun Alat Pengendali Suhu pada Proses Pasteurisasi Susu Murni Menggunakan Arduino Berbasis IoT
Article Sidebar
Main Article Content
Abstract
This research aims to design and develop a temperature control device for the pasteurization process of pure milk using Arduino based on the Internet of Things (IoT). The device is designed to monitor and regulate the temperature automatically during the pasteurization process to ensure its quality and safety. Arduino, as the main platform, is used to collect temperature data through temperature sensors that are directly connected to the system. The temperature data is then sent to a server through the internet network for real-time processing and monitoring. Intelligent temperature control algorithms are implemented in Arduino to adjust heating or cooling during the pasteurization process according to the set temperature point. The results of this research are expected to provide an efficient and accurate solution for temperature control in the pasteurization process of pure milk, as well as improve the overall safety and quality of dairy products.
Downloads
Article Details
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
The Authors submitting a manuscript do so on the understanding that if accepted for publication, copyright of the article shall be assigned to JTIK journal and Research Division, KITA Institute as the publisher of the journal. Copyright encompasses rights to reproduce and deliver the article in all form and media, including reprints, photographs, microfilms, and any other similar reproductions, as well as translations.
JTIK journal and Research Division, KITA Institute and the Editors make every effort to ensure that no wrong or misleading data, opinions or statements be published in the journal. In any way, the contents of the articles and advertisements published in JTIK journal are the sole and exclusive responsibility of their respective authors and advertisers.
The Copyright Transfer Form can be downloaded here: [Copyright Transfer Form JTIK]. The copyright form should be signed originally and send to the Editorial Office in the form of original mail, scanned document or fax :
Muhammad Wali (Editor-in-Chief)
Editorial Office of Jurnal JTIK (Jurnal Teknologi Informasi dan Komunikasi)
Research Division, KITA Institute
Teuku Nyak Arief Street Nomor : 7b, Lamnyong, Lamgugop, Kota Banda Aceh
Telp./Fax: 0651-8070141
Email: jtik@lembagakita.org - journal@lembagakita.org
References
Prasetyo, M.S., 2020. Analisa heat transfer alat pasteurisasi susu. Jurnal Mesin Nusantara, 3(1), pp.1-8. DOI: https://doi.org/10.29407/jmn.v3i1.14217
Pratama, R.A. and Permana, I., 2021. Simulasi Permodelan Menggunakan Sensor Suhu Berbasis Arduino. Edu Elektrika Journal, 10(1), pp.7-12. DOI: https://doi.org/10.15294/eej.v10i1.47112.
Indriyanto, S., Syifa, F.T. and Permana, H.A., 2020. Sistem Monitoring Suhu Air pada Kolam Benih Ikan Koi Berbasis Internet of Things. TELKA-Jurnal Telekomunikasi, Elektronika, Komputasi dan Kontrol, 6(1), pp.10-19. DOI: https://doi.org/10.15575/telka.v6n1.10-19.
Simanjuntak, D.B., Widodo, B., Susilo, S. and Nempung, J.I., 2021. Sistem Pengendalian Suhu Dan Kelembaban Pada Bilik Disinfektan Berbasis Blynk Dengan Menggunakan Nodemcu ESP8266. Lektrokom: Jurnal Ilmiah Teknik Elektro, 4(1), pp.8-8. DOI: https://doi.org/10.33541/lektrokom.v4i1.3388.
Hidayat, D. and Sari, I., 2021. Monitoring suhu dan kelembaban berbasis Internet of Things (IoT). Jurnal Teknologi dan Ilmu Komputer Prima (JUTIKOMP), 4(1), pp.525-530. DOI: https://doi.org/10.34012/jutikomp.v4i1.1676
Ikhsan, R.N. and Syafitri, N., 2021. Pemanfaatan Sensor Suhu DS18B20 sebagai Penstabil Suhu Air Budidaya Ikan Hias. In Seminar Nasional Energi, Telekomunikasi dan Otomasi (SNETO) (pp. 18-26).
Fathulrohman, Y.N.I. and Saepulloh, A., 2019. Alat Monitoring suhu dan kelembaban menggunakan arduino uno. Jurnal Manajemen dan Teknik Informatika (JUMANTAKA), 2(1).
Indriyanto, S., Yuliantoro, P. and Kusumawati, D., 2022. Sistem Monitoring Suhu Air Pada Aquascape Berbasis Internet of Things (IoT). (Journal of Telecommunication, Electronics, and Control Engineering (JTECE)), 4(1), pp.56-65. DOI: https://doi.org/10.20895/jtece.v4i1.608
Gunawan, I., Akbar, T. and Ilham, M.G., 2020. Prototipe penerapan Internet Of Things (Iot) pada monitoring level air tandon menggunakan nodemcu Esp8266 dan Blynk. Infotek J. Inform. dan Teknol, 3(1), pp.1-7.
Azzaky, N. and Widiantoro, A., 2020. Alat penyiram tanaman otomatis berbasis arduino menggunakan internet of things (IOT). J-Eltrik, 2(2), pp.48-48. DOI: https://doi.org/10.30649/j-eltrik.v2i2.48
Zakariya, M.F., 2022. Monitoring Dan Kontrol Kondisi Air Kolam Ikan Menggunakan Blynk Berbasis Iot. Journal of System and Computer Engineering (JSCE), 3(1), pp.196-205. DOI: https://doi.org/10.47650/jsce.v2i2.348.
Fakhrurrozi, A., 2023. Monitoring kualitas air tambak ikan bandeng menggunakan aplikasi Blynk berbasis IoT (Doctoral dissertation, Universitas Islam Negeri Maulana Malik Ibrahim).
Silalahi, F.D. and Dian, J., 2021. Implementasi internet of things (IoT) dalam monitoring suhu dan kelembaban ruang produksi obat non steril menggunakan Arduino berbasis web. JUPITER: Jurnal Penelitian Ilmu dan Teknologi Komputer, 13(2), pp.62-68. DOI: https://doi.org/10.5281/3662.jupiter.2021.10
Surya, A. and Mukhaiyar, R., 2023. Alat Pengatur Suhu Otomatis pada Kompor Gas Berbasis Internet of Things (IoT) dan Sensor Suhu Menggunakan Mikrokontroler Arduino. JTEIN: Jurnal Teknik Elektro Indonesia, 4(1). DOI: https://doi.org/10.24036/jtein.v4i1.394
Pradhana, C. and Machfuroh, T., 2020. Monitoring Pembakaran Suhu Batu Bata Konvensional Berbasis Mikrokontroler Arduino Dan IOT (Internet of Things). JUPITER (Jurnal Pendidikan Teknik Elektro), 5(2), pp.1-8. DOI: http://doi.org/10.25273/jupiter.v5i2.7556.